10x GU10 Recessed Downlights Polished Chrome Tilt LED Spotlight Ceiling Fitting Overview
- Brand: HiBay
- Material: Metal
- Colour: Polished Chrome
Overview
10x GU10 Recessed Downlights Polished Chrome Tilt LED Spotlight Ceiling Fitting – Illuminate your space with the 10x GU10 Recessed Downlights in a stylish polished chrome finish. Designed to provide a sleek and modern lighting solution, these downlights are perfect for enhancing the ambience in various settings such as living rooms, bedrooms, and kitchens. With a luminous flux of 800 lumens, they offer bright and efficient lighting to brighten up any area.
Ideal for homeowners looking to upgrade their lighting fixtures, these recessed downlights are easy to install and feature a fashionable round shape. The metal construction ensures durability, while the toggle switch installation type allows for straightforward operation. Whether you’re hosting a gathering or enjoying a quiet evening at home, these downlights will create the perfect atmosphere.
Key benefits
- Stylish polished chrome finish enhances modern decor.
- Energy-efficient LED technology for lower energy consumption.
- 800 lumen output provides bright illumination.
- Recessed design saves space and creates a sleek look.
- Versatile for use in various rooms, including living room and kitchen.
- Durable metal construction ensures longevity.
- Easy to install with recessed mount switch style.
- Fashionable design complements contemporary interiors.
- Compatible with GU10 LED bulbs for flexible lighting options.
How to use
- Ensure the power supply is turned off before installation.
- Choose the desired location for your recessed downlights, ensuring adequate space for installation.
- Using a suitable cutting tool, create a round opening in the ceiling for each downlight, following the manufacturer’s guidelines.
- Connect the downlight fixture to the power supply, ensuring all connections are secure and insulated.
- Carefully insert the downlight into the opening, ensuring it is flush with the ceiling.
- Turn the power supply back on and test the downlights to ensure they are functioning correctly.
- Adjust the tilt of the downlights as desired to direct light where needed.
Specifications
- Manufacturer: HiBay
- Finish: Polished
- Light Direction: Downlight
- Light Fixture Form: Recessed
- Luminous Flux: 800 lumen
- Material: Metal
- Number of Lights: 10
- Power and Plug Description: AC
- Shade Material: Metal
- Shape: Round
- Special Features: Corded
- Specific Uses: Home, Living Room, Bedroom, Kitchen
- Style: Fashionable
- Switch Installation Type: Recessed Mount
- Switch Style: Toggle
- Type of Bulb: LED
- Voltage: 240 Volts (AC)
What’s in the box
- 10x GU10 Recessed Downlights
FAQs
What is included in the box?
Bulb not included.
What is the luminous flux of the downlights?
The luminous flux is 800 lumen.
What type of bulb is compatible with these downlights?
These downlights are compatible with LED bulbs.
Mr A B Marriott –
Replaced spots (12v) with these the size is about 1-2mm larger than the hole for the previous ones, and with the tilt feature on these the hole needs to be sufficient to not “snag”.Unfortunately i don’t have a hole cutter large enough in the 2 sets that I own (not that would of helped much as fitting to existing holes but in case your going to install new) you are likely therefore to need to “enlarge the hole a bit)On the plus side and one of the reasons I got these is that the square design overlaps sufficiently to allow you to get away with a ruff cut hole and still look perfect after.The securing design (fully sprung loaded clips on the left and right of the pivot point holds them to the ceiling very well and secure, but to get them folded in far enough to put through the hole in the first place is very tight, so much so I must have deformed one of the housings while doing it.The bulb is held in place using a sprung wire that loosely slots into two 3mm gaps aligned with the clips above, the gap between the bulb hitting the back and the slots is very tight as such the deformation I caused putting the frame in the hole above meant the bulb wouldn’t fully go in flush and I couldn’t then get the spring wire in place had to replace that housing.In hindsight it might have been better to have fully assembled the light fixture before then wiring that in and putting the whole assembly into the ceiling, but there would then be a risk that later trying to replace a bulb might have proved problematic if the casing was deformed enough that once the clip was removed you couldn’t get it back in, I am sure a bit of manipulation and you’d be able to fix this though.Once installed they look really good, and the tilt feature makes getting the correct light where you need it easier, I use 3 in a row by the sink, middle of room, over the bath / shower, can tilt the ones by the sink and bath to direct light better for using the mirror and deflect away from the eyes when using the bath.I jumped straight in and never checked for any install instructions, also never spotted any so unless there was one lot for all 10 there was definitely not any in each of the frame boxes, hence the score of 4 over 5
book baebe –
Hi, Can’t fault this product for cost , style and precision design but a few tips for installation.On all of the ones supplied to me, the earth wire linking to the bracket was loose and would not tighten. I added a washer to make it tight. Just me being careful. The recess hole required to cut through the plasterboard measures at 63mm. I cut my holes this size but this proved too small. Unluckily a standard hole saw is 63mm ( 2.5″) so you will need to increase the hole size all round by a couple of mm.The worst part, in my opinion, is the connector block for the wiring input. Most lighting is 1.5mm wire and if you are installing several downlights in a ring, you need to put two wires in each connector. It’s tight and the stiff cable makes it harder. The cover on this connector is held with a screw that also holds the mounting bracket. You will need to trim the cover edge to accommodate the power wires or the screw will not engage with the bracket. The cover, I’m guessing, is also used to clamp the power wires down tightly so don’t trim too much.If you bear these points in mind you will have a trouble free installation.
Antonio Sanchez –
Downlights
Todo correcto, fácil de instalar. Quedan muy bien puestos
Perfectus –
5 stars for price and unit amountunits installed neat and flush to the ceiling – tilt function great.The connective arm that connects to main chassis could be better as it’s a bit cheap wobbly – but it’s functional and out of sight
Terrsa –
These light fittings look designer what a change from plain old round ones would definitely recommend
Anonymous –
These light fittings are great sit nice and flat on the Ceiling and look really tidy. Construction seems quite robust and the finish is good.
Amazon Customer –
Easy to fit
S-V.O’Hanlon –
Australian compliances
I think I will have to return all of my downlights, because there is no Compliance with the Australian Standards !!??
James –
Good lights ! They are not a £300 set up but at the price and today’s standards they really are not far off atall .
Deppy –
Excellent price, great quality. Bright bulbs and a brilliant buy!